Steam Fired Instantaneous Water Heater | One-Way Method
Hot Water Supply System Steam Fired Instantaneous Water Heater | One-Way Method
RE1LM (PRV for LM15 Series)
Features/Applications
Features
Specially designed for the LM15 series optimized for maximum water heater flow rate.
Typical applications
Suitable for reducing pressure in LM15 series steam lines.
Dimensions/Weight
Dimensions/Weight
|
Size |
Dimensions (mm) | Dimensions (in) | Weight | |||||||
| L | H1 | H2 | W | L | H1 | H2 | W | (kg) | (lb) | |
| 1/2” | 80 | 137 | 46 | 65 | 3.2 | 5.4 | 1.8 | 2.6 | 1,4 | 3.1 |
Specifications
| Model | Connection |
Max. operating pressure |
Operating pressure range |
Control pressure range |
Max. pressure reduction ratio |
Max. operating temperature |
Maximum flow rate |
Body material |
||||||
| Type |
Size |
PMO (MPa) |
PMO (psig) |
(Primary side pressure) (MPa) |
(Primary side pressure) (psig) |
(Secondary side pressure) (MPa) |
(Secondary side pressure) (psig) |
TMO (℃) |
TMO (℉) |
(kg/h) | (lb/h) | |||
| RE1LM |
Screwed Rc,NPT |
1/2” | 0,8 | 116 | 0,3 - 0,8 | 44 - 116 | 0,13 - 0,3 | 18.9 - 43.5 | 6.2 : 1 | 204 | 399 | 92 | 202.8 |
Brass C3771 |
● Accessories: Y strainer / YM1 x1
Installation Examples
Related Products Models for reference
Steam traps DV1-10L
Separator H3 H5
●Precautions
*If the way you intend to use the product involves physical contact with hot water, please be sure to separately install a thermostatic mixing valve (available on the market) in order to prevent scalding.
*Do not use for shower systems.
*It is not recommended that water supplied using this product be directly used for drinking water.
*Do not use with vinyl chloride pipes or lining pipes
*Ensure that the pressure differential between the steam supply pressure and the condensate discharge part is at least 0,03MPa (4.4psig). If back pressure is applied to the condensate discharge pipe, the maximum hot water supply rate drops.
*If the water supplied to a hot water device contains much silica or calcium, this may cause accelerated deterioration in the performance of the main components.
*Before use, be sure to perform an inspection in accordance with the procedure in the “Using Water Heaters Safely” document included with this product.
Related Products
Related Products
Diaphragm steam trap
|
Pressure reducing valve for steam
|
Hose hangerAll stainless steel and wall-mounted
|
Hose reel set for cleaningMax. usage temperature： 100℃ (212℉) Available hose length： 5ｍ(196.9 in), 10m (393.7 in), 15m (590.6 in)
|
Acrylic Termometer
|
Download
* Membership registration is required to download the documents.
Features
Specially designed for the LM15 series optimized for maximum water heater flow rate.
Typical applications
Suitable for reducing pressure in LM15 series steam lines.
Dimensions/Weight
|
Size |
Dimensions (mm) | Dimensions (in) | Weight | |||||||
| L | H1 | H2 | W | L | H1 | H2 | W | (kg) | (lb) | |
| 1/2” | 80 | 137 | 46 | 65 | 3.2 | 5.4 | 1.8 | 2.6 | 1,4 | 3.1 |
| Model | Connection |
Max. operating pressure |
Operating pressure range |
Control pressure range |
Max. pressure reduction ratio |
Max. operating temperature |
Maximum flow rate |
Body material |
||||||
| Type |
Size |
PMO (MPa) |
PMO (psig) |
(Primary side pressure) (MPa) |
(Primary side pressure) (psig) |
(Secondary side pressure) (MPa) |
(Secondary side pressure) (psig) |
TMO (℃) |
TMO (℉) |
(kg/h) | (lb/h) | |||
| RE1LM |
Screwed Rc,NPT |
1/2” | 0,8 | 116 | 0,3 - 0,8 | 44 - 116 | 0,13 - 0,3 | 18.9 - 43.5 | 6.2 : 1 | 204 | 399 | 92 | 202.8 |
Brass C3771 |
● Accessories: Y strainer / YM1 x1
Related Products Models for reference
Steam traps DV1-10L
Separator H3 H5
●Precautions
*If the way you intend to use the product involves physical contact with hot water, please be sure to separately install a thermostatic mixing valve (available on the market) in order to prevent scalding.
*Do not use for shower systems.
*It is not recommended that water supplied using this product be directly used for drinking water.
*Do not use with vinyl chloride pipes or lining pipes
*Ensure that the pressure differential between the steam supply pressure and the condensate discharge part is at least 0,03MPa (4.4psig). If back pressure is applied to the condensate discharge pipe, the maximum hot water supply rate drops.
*If the water supplied to a hot water device contains much silica or calcium, this may cause accelerated deterioration in the performance of the main components.
*Before use, be sure to perform an inspection in accordance with the procedure in the “Using Water Heaters Safely” document included with this product.
Related Products
Diaphragm steam trap
|
Pressure reducing valve for steam
|
Hose hangerAll stainless steel and wall-mounted
|
Hose reel set for cleaningMax. usage temperature： 100℃ (212℉) Available hose length： 5ｍ(196.9 in), 10m (393.7 in), 15m (590.6 in)
|
Acrylic Termometer
|
* Membership registration is required to download the documents.