Steam Fired Instantaneous Water Heater | One-Way Method

Hot Water Supply System Steam Fired Instantaneous Water Heater | One-Way Method RE1LM (PRV for LM15 Series)

Hot Water Supply System Steam Fired Instantaneous Water Heater | One-Way Method

RE1LM (PRV for LM15 Series)

      Hot Water Supply System Steam Fired Instantaneous Water Heater | One-Way Method RE1LM (PRV for LM15 Series)

      Features/Applications

      Features

      • Specially designed for the LM15 series optimized for maximum water heater flow rate.

      Typical applications

      Suitable for reducing pressure in LM15 series steam lines.

      Dimensions/Weight

      Dimensions/Weight

      RE1LM_Rc.png
       

      Size

      Dimensions (mm) Dimensions (in) Weight
      L H1 H2 W L H1 H2 W (kg) (lb)
      1/2” 80 137 46 65 3.2 5.4 1.8 2.6 1,4 3.1

      Specifications

      Model Connection

      Max. operating

      pressure

      Operating pressure

      range

      Control pressure

      range

      Max. pressure

      reduction ratio

      Max. operating

      temperature

      Maximum

      flow rate

      Body

      material

      Type

      Size

      PMO

      (MPa)

      PMO

      (psig)

      (Primary

      side pressure)

      (MPa)

      (Primary

      side pressure)

      (psig)

      (Secondary

      side pressure)

      (MPa)

      (Secondary

      side pressure)

      (psig)

      TMO

      (℃)

      TMO

      (℉)

      (kg/h) (lb/h)
      RE1LM

      Screwed

      Rc,NPT

      1/2” 0,8 116 0,3 - 0,8 44 - 116 0,13 - 0,3 18.9 - 43.5 6.2 : 1 204 399 92 202.8

      Brass

      C3771

      ● Accessories: Y strainer / YM1 x1

      Installation Examples

      LM15-Ⅳ_配管例.png

      Related Products Models for reference
       Steam traps  DV1-10L
       Separator   H3  H5


      ●Precautions
      *If the way you intend to use the product involves physical contact with hot water, please be sure to separately install a thermostatic mixing valve (available on the market) in order to prevent scalding.
      *Do not use for shower systems.
      *It is not recommended that water supplied using this product be directly used for drinking water.
      *Do not use with vinyl chloride pipes or lining pipes
      *Ensure that the pressure differential between the steam supply pressure and the condensate discharge part is at least 0,03MPa (4.4psig). If back pressure is applied to the condensate discharge pipe, the maximum hot water supply rate drops.
      *If the water supplied to a hot water device contains much silica or calcium, this may cause accelerated deterioration in the performance of the main components.
      *Before use, be sure to perform an inspection in accordance with the procedure in the “Using Water Heaters Safely” document included with this product.

      Related Products

      Related Products

      Diaphragm steam trap
      DV1-10L

      thumb_dv1.jpg

       

      Pressure reducing valve for steam
      REC1

      detail_rec1.jpg

       

       Hose hanger

      All stainless steel and wall-mounted

       

      ホースハンガー.png

       

      Hose reel set for cleaning

      Max. usage temperature: 100℃ (212℉)

      Available hose length:

      5m(196.9 in), 10m (393.7 in), 15m (590.6 in), 20m (787.4 in)

       

      ホースリールセット.png

      Acrylic Termometer
      PU60N

      Measurement range :0-150℃ (32 - 323℉)

      External diameter     :63mm (2.5 in) 

      Screwed:R3/8

      Temperature sensor length  :40mm (1.6 in)

      PU60N.png

       

      Features

      • Specially designed for the LM15 series optimized for maximum water heater flow rate.

      Typical applications

      Suitable for reducing pressure in LM15 series steam lines.

      Dimensions/Weight

      RE1LM_Rc.png
       

      Size

      Dimensions (mm) Dimensions (in) Weight
      L H1 H2 W L H1 H2 W (kg) (lb)
      1/2” 80 137 46 65 3.2 5.4 1.8 2.6 1,4 3.1
      Model Connection

      Max. operating

      pressure

      Operating pressure

      range

      Control pressure

      range

      Max. pressure

      reduction ratio

      Max. operating

      temperature

      Maximum

      flow rate

      Body

      material

      Type

      Size

      PMO

      (MPa)

      PMO

      (psig)

      (Primary

      side pressure)

      (MPa)

      (Primary

      side pressure)

      (psig)

      (Secondary

      side pressure)

      (MPa)

      (Secondary

      side pressure)

      (psig)

      TMO

      (℃)

      TMO

      (℉)

      (kg/h) (lb/h)
      RE1LM

      Screwed

      Rc,NPT

      1/2” 0,8 116 0,3 - 0,8 44 - 116 0,13 - 0,3 18.9 - 43.5 6.2 : 1 204 399 92 202.8

      Brass

      C3771

      ● Accessories: Y strainer / YM1 x1

      LM15-Ⅳ_配管例.png

      Related Products Models for reference
       Steam traps  DV1-10L
       Separator   H3  H5


      ●Precautions
      *If the way you intend to use the product involves physical contact with hot water, please be sure to separately install a thermostatic mixing valve (available on the market) in order to prevent scalding.
      *Do not use for shower systems.
      *It is not recommended that water supplied using this product be directly used for drinking water.
      *Do not use with vinyl chloride pipes or lining pipes
      *Ensure that the pressure differential between the steam supply pressure and the condensate discharge part is at least 0,03MPa (4.4psig). If back pressure is applied to the condensate discharge pipe, the maximum hot water supply rate drops.
      *If the water supplied to a hot water device contains much silica or calcium, this may cause accelerated deterioration in the performance of the main components.
      *Before use, be sure to perform an inspection in accordance with the procedure in the “Using Water Heaters Safely” document included with this product.

      Related Products

      Diaphragm steam trap
      DV1-10L

      thumb_dv1.jpg

       

      Pressure reducing valve for steam
      REC1

      detail_rec1.jpg

       

       Hose hanger

      All stainless steel and wall-mounted

       

      ホースハンガー.png

       

      Hose reel set for cleaning

      Max. usage temperature: 100℃ (212℉)

      Available hose length:

      5m(196.9 in), 10m (393.7 in), 15m (590.6 in), 20m (787.4 in)

       

      ホースリールセット.png

      Acrylic Termometer
      PU60N

      Measurement range :0-150℃ (32 - 323℉)

      External diameter     :63mm (2.5 in) 

      Screwed:R3/8

      Temperature sensor length  :40mm (1.6 in)

      PU60N.png

       

      Contact